HydroRep

SKU: 60700006AME
Back to Samples Back
HydroRep

HydroRep

SKU: 60700006AME
  • 10  in stock
  • Inventory on the way

MATERIALS ON WHICH TO USE THE PRODUCT

PORCELAIN AND CERAMIC TILE, GLASS MOSAIC, QUARRY TILE

HYBRID & EPOXY PRO removes fresh epoxy, urethane and pre-mixed grout residue during installation, resulting in a clean surface right after grouting. Perfect for the professional cleaning of porcelain and ceramic tile, large format tile, glass mosaic and quarry tile. Ideal for cleaning grouting tools after use.

IDEAL FOR

  • Porcelain and ceramic tile, glass mosaic, quarry tile
  • Secure Payments

Flat Rate Shipping + 365 Day Returns
$
Special Order

WHAT IT'S FOR

  • Protects exterior surfaces and grout joints from water and humidity.
  • Creates a water repellent, breathable barrier.
  • Prevents wear caused by weather damage.
  • Guards the surface against moss, mold, and efflorescence.
  • Ideal for brick veneers and concrete.

ADVANTAGES

  • Does not alter the material’s natural finish.
  • Offers long lasting, renewable protection.
  • Provides very high coverage rates.
  • Does not yellow over time.

ADVANTAGES

  • Does not alter the material’s natural finish.
  • Offers long lasting, renewable protection.
  • Provides very high coverage rates.
  • Does not yellow over time.

IDEAL FOR

  • ALL UNPOLISHED NATURAL STONE, CONCRETE

BEFORE AND AFTER

HOW TO USE IT

Ready to use, no dilution necessary. On a clean, dry surface apply an even, generous coat of HYDROREP with a brush, roller or airless sprayer.

Apply the product until the surface is fully saturated, then wait 8 hours.
A second coat may be necessary, depending on the absorbency of the material. On dense natural stone apply only one coat. For concrete and porous natural stone, two coats are needed. The surface may be used for normal foot traffic after 8 hours. Full cure and maximum sealer protection is achieved in 24 hours. To provide an oil repellent barrier on exterior surfaces, apply a finishing coat of FOB after 8 hours.

PLEASE NOTE

Before application, test HYDROREP on a small, inconspicuous area of the surface or loose sample to check for any changes in color. Do not apply the product outdoors if rain is in the forecast.

COVERAGE

1 Liter (1.06 QT)

  • Natural stone › 215 sq.ft. (20 m2)
  • Concrete › 54-107 sq.ft. (5-10 m2)
  • “Coverage rates are indicative and per coat.

technical
sheet

safety
sheet

About us

Excellent product! It just took one spray to get rid of a patch of mould on the wall, without leaving a trace. The bathroom’s as good as new. Highly recommended!

Lucia Vitali

Easy to apply, excellent self-polishing power and good end results. I’ve still got to test how it lasts over time.

Sandro Giuliani

Excellent, like all Fila products. It removes algae even without rinsing or wiping with a cloth.

Andrea

Recommended by a tiler who’s a friend of mine. I wouldn’t swap it for any other product, even if it seems expensive at first glance (you really need very little, so it lasts a very long time). It doesn’t leave smears and above all it isn’t sticky like other floor cleaners. I’ve used it for a long time and I recommend it. The other Fila products are unique as well!

Gabriella

Fila products always live up to expectations. I used it on an unpolished Serizzo marble surface that had absorbed months and months of dirt.

Rino

Fila products are always very high quality.

Michela

You can always be sure with FILA products

Gianluca
More from Fila Solutions
More from Cleaners and Sealers
CleanAll Spray
KitchenKare
Silicone Finishing Kit
GroutRenew
Instant Remover
Hybrid & Epoxy Pro
Recently viewed
You may also like