PW10

SKU: 44040704AME
Back to Samples Back
PW10

PW10

SKU: 44040704AME
  • 10  in stock
  • Inventory on the way

Anti-Contaminant Back Sealer - Water Based

Coverage of 1 Gallon:

1 gallon will cover 410-600 sq. ft.

IDEAL FOR

  • Natural stone, granite, marble, agglomerates, terracotta and absorbent materials
  • Secure Payments

Flat Rate Shipping + 365 Day Returns
$
Special Order

WHAT IT'S FOR

  • Permanently protects tile surfaces from streaks or stains caused by efflorescence.
  • Prevents mineral deposits from rising through the substrate and sides to the material surface.
  • Specifically created for all natural stone, terracotta, and absorbent materials.
  • Ideal for floors, stairs, and wall coverings.

ADVANTAGES

  • Eco-friendly: water-based and VOC-free: contributes towards LEED credits.
  • Apply to the back and sides of tiles and slabs in natural stone, granite, marble, agglomerates, terracotta and absorbent materials prior to installation.
  • Does not form a film and allows material breathability. (water vapor escapes for proper drying and curing of setting materials)
  • Does not affect bonding, in accordance with UNI EN 1348-2009 and ASTM C482-02 R-2009 standards.

ADVANTAGES

  • Eco-friendly: water-based and VOC-free: contributes towards LEED credits.
  • Apply to the back and sides of tiles and slabs in natural stone, granite, marble, agglomerates, terracotta and absorbent materials prior to installation.
  • Does not form a film and allows material breathability. (water vapor escapes for proper drying and curing of setting materials)
  • Does not affect bonding, in accordance with UNI EN 1348-2009 and ASTM C482-02 R-2009 standards.

IDEAL FOR

  • NATURAL STONE, GRANITE, MARBLE, AGGLOMERATES, TERRACOTTA AND ABSORBENT MATERIALS

BEFORE AND AFTER

VIDEO TUTORIAL

HOW TO USE IT

Ready to use, no dilution necessary. Thoroughly clean the back and sides of the tile or slab, removing dust and residue.

Apply an even coat of the product to a dry surface using a large flat paintbrush, cloth or airless sprayer.
Leave to dry for about 24 hours before installing. Warning: Must not be applied to the front of the tile or slab. The product does not affect the bonding properties of the adhesive (regulation UNI EN 1348-2009 and ASTM C482-02 R-2009. Advice from the experts: For correct post-installation cleaning, we recommend washing the surface with a specific cleaner according to the characteristics of the material. (CLEANALL, STONECLEAN, PS87, DETERDEK).

PLEASE NOTE

Do not apply PW10 on polished surfaces.

COVERAGE

1 GAL (3,78L) ›

  • 410/600 sq. ft. (38-56 m2)Coverage rates are indicative and per coat.

CONTAINER SIZE

100 liter drum

technical
sheet

safety
sheet

About us

Excellent product! It just took one spray to get rid of a patch of mould on the wall, without leaving a trace. The bathroom’s as good as new. Highly recommended!

Lucia Vitali

Easy to apply, excellent self-polishing power and good end results. I’ve still got to test how it lasts over time.

Sandro Giuliani

Excellent, like all Fila products. It removes algae even without rinsing or wiping with a cloth.

Andrea

Recommended by a tiler who’s a friend of mine. I wouldn’t swap it for any other product, even if it seems expensive at first glance (you really need very little, so it lasts a very long time). It doesn’t leave smears and above all it isn’t sticky like other floor cleaners. I’ve used it for a long time and I recommend it. The other Fila products are unique as well!

Gabriella

Fila products always live up to expectations. I used it on an unpolished Serizzo marble surface that had absorbed months and months of dirt.

Rino

Fila products are always very high quality.

Michela

You can always be sure with FILA products

Gianluca
More from Fila Solutions
More from Fila Products
CleanAll
As low as
CleanAll Spray
DeterDek
As low as
EpoxyOff
GroutRenew
Hybrid & Epoxy Pro
Recently viewed
You may also like
Back to Fila Products