HOW TO USE IT
Ready to use, no dilution necessary. Indoor surfaces:
On a dry and clean surface, apply an even coat of FOB with a paintbrush, lambswool or roller applicator.
Let sit for 10 minutes, then wipe and rub the surface to allow any excess product to completely penetrate or be removed. Wait 8 hours to apply a second coat if necessary. The surface may be used for normal foot traffic 8 hours after the final coat. Full cure and maximum sealer protection is achieved in 24 hours. Outdoor surfaces: On a clean and dry surface, apply two coats of FOB with a large paintbrush or roller allowing 8 hours between coats. The surface may be used for normal foot traffic 8 hours after the final coat. Full cure and maximum sealer protection is achieved in 24 hours.
PLEASE NOTE
Do not apply FOB on a previously waxed surface, strip it first. Before full application, test the product on a small, inconspicuous area of the surface or loose sample to check for any discoloration. Do not apply FOB outdoors if rain is in the forecast.